Meiko UPster H 500 M2 Original Operating Instructions page 42

8.10 Service level
8.10.1 View parameters
42 / 56
Code display
1. Switch to authorisation level 1 Service level (10000), see chapter "Change au-
thorisation level" on page 41.
2. Select the entry 1–1.
3. Confirm the selection.
The first parameter is displayed.
4. Scroll through and view the parameters using the wash programme keys.
The service level can be exited with the On/Off key.
Meaning
View parameter, see page 42.
Vent rinse pipe, see page 43.
Vent detergent line, see page 43.
Manually start regeneration, see page 43.
Reset the counter for replacing the partial
desalination cartridge, see page 43.
9760413