Meiko UPster H 500 M2 Original Operating Instructions page 11

3.6 Fundamental safety and accident prevention regulations
9760413
•
Washing plastic parts that are not heat and alkali-stable
•
Washing parts made of aluminium (such as pots, containers or trays only with a
suitable detergent to avoid black discolouration)
•
Conversions and modifications by means of non-approved conversion kits
Note
The following safety instructions aim to protect operating personnel as well as third
parties and the dishwashing machine itself.
Please take note of the information in these instructions and the signs on the dish-
washing machine.
However, safety can only be guaranteed during operation if all necessary measures
are taken.
The operator of the machine has an obligation of care to ensure that these
measures are planned for and also to check that they are correctly implemented.
The operator must ensure in particular that:
•
The dishwashing machine is only used in accordance with its intended purpose.
In the event of the machine being used or operated contrary to this, damage or
risks may arise.
•
In order to guarantee functionality and safety, only original spare parts supplied
by the manufacturer may be used.
•
The safety of the dishwashing machine is not impaired by the subsequent in-
stallation of a dosage system.
•
Only appropriately qualified and authorised personnel operate, maintain and
repair the dishwashing machine.
•
No one sits or stands on the open door.
•
Staff are regularly trained in all questions relating to occupational safety and
environmental protection and are familiar with the operating instructions and, in
particular, the safety information that they contain.
•
The area around the machine is assessed with reference to the risk to other
people, e.g. children; people with physical, sensory or mental impairments;
people lacking in knowledge or experience. In case of doubt, special optional
initiation functions other than conscious, intentional operation (i.e. operation
from the screen) are to be deactivated.
•
The dishwashing machine is only operated in perfect, functional condition, all
protection devices and covers are installed.
•
The safety and switching equipment is regularly tested to ensure it is function-
ing correctly.
•
Dishwashers accessible from behind may only be operated with a rear cover.
•
The required personal protective equipment is made available to and worn by
maintenance and repair personnel.
•
A functional test on all dishwashing machine safety systems is carried out at
every regular maintenance appointment.
•
None of the safety and warning notices affixed to the dishwashing machine it-
self are removed and all are legible.
•
Upkeep (maintenance and inspection) is carried out on optional vendor parts
according to the requirements in the corresponding instructions.
•
Following installation, commissioning and handing over of the dishwashing ma-
chine to the customer/operator, no modifications are made (e.g. electrical or
mechanical machine components).
11 / 56