Meiko UPster H 500 M2 Original Operating Instructions page 38

8.8.1 Messages
INFO Description
Emergency pro-
120
gramme active
121 Door/hood not closed
Incorrect password/no
122
authorisation
Factory setting param-
123
eter list
Maintenance neces-
126
sary
Lack of rinse aid (with
integrated fill-level de-
420
tection)
Lack of detergent (with
520 integrated fill-level de-
tection)
Regeneration is run-
720
ning
Regeneration not pos-
721
sible
722 Salt container empty
38 / 56
When a malfunction occurs, an information or error message (INFO/ERR) is dis-
played.
•
Information messages (INFO) can be acknowledged with the wash key. If the
cause has been remedied (see table), operation can be continued.
•
Error messages (ERR) usually require the deployment of an authorised service
technician!
•
If the machine displays an info or error message not listed in the following ta-
bles, contact your service technician!
Possible cause
•
No boiler/tank heating
•
No fresh water supply
•
Door/hood open
•
I/O circuit board defective
•
Microswitch defective
•
Microswitch not correctly set
•
Code incorrectly entered
•
Switch supply voltage on/off
•
The set operating hours
(P 122) or batch number
(P 123) has been reached
•
Canister empty
•
Suction lance not correctly
introduced
•
Regeneration programme
has been started and is run-
ning
•
Salt container empty
•
No salt present
•
No water in the salt container
Measures/remedial action
•
Possible to continue work at lim-
ited capacity
•
Call a service technician!
•
Close door/hood
•
Call a service technician!
•
Enter code again
•
No intervention by the operator is
necessary
•
Message disappears after 5 min.
•
Possible to continue working
•
Call a service technician!
•
Replace empty canister
•
Check suction lance
•
Where appropriate, ventilate
pipes
•
Let regeneration programme run
to completion
•
Regeneration programme cannot
be interrupted
•
Possible to continue working
Fill salt container
Fill salt container
•
Where appropriate, Fill water in
the salt container
9760413