Meiko UPster H 500 M2 Original Operating Instructions page 41

8.9 Change authorisation level
9760413
Key/symbol Meaning
On/Off key
Start programming
Wash key
Confirm entry and jump to next position in the code
Wash programme key 1
Increase value by one
Wash programme key 3
Decrease value by one
1. Press and hold the On/Off key for about three seconds.
2. Enter the service code for the required authorisation level.
After entry of the correct code, the desired authorisation level (1, 4) is displayed in
the left field in the first digital position. If the entry is incorrect, the message Info
122 appears.
Authorisation level 1 – Service level
Read service data (service code: 10000)
The operator can view the service data.
Read/modify service data (service code 10001)
The operator can carry out all functions required for normal operation and configure
the settings.
Authorisation level 4 – Dosing equipment level
Read settings (service code: 40000)
The operator can view the data for the dosing technology.
Read/modify settings (service code 40044)
The operator can view/edit all the relevant parameters for the dosing technology.
41 / 56