Meiko UPster H 500 M2 Original Operating Instructions page 35

8.5.2 Fill salt container
9760413
Caution
Damage to water softener if salt container is not filled
Fill empty salt container promptly if salt container control light is red!
If the capacity of the installed water softener is largely exhausted, the red control
light above the symbol for the salt container lights up.
1. Open hood with both hands and fill salt solution container with 2.2 kg of regen-
eration salt (sodium chloride with a grain size of 0.3 - 1 mm). If possible, use a
loading chute!
During filling, water and salt particles may overflow from the salt container!
2. Clean the seal and thread of the salt solution container and close tightly. The
ingress of wash water can cause capacity loss in the water softener!
3. Close hood with both hands.
4. Start the self-cleaning programme (if necessary, switch off the dishwasher us-
ing the on/off key and then press the wash key) to dissolve any salt particles
that have escaped and pump them out of the tank. If the salt remains in the
wash tank for a long time, this can result in corrosion, and even pitting, in the
tank bottom.
Regeneration starts automatically once machine is ready for operation, see chap-
ter "Putting the machine into operation" on page 27and on the next page.
35 / 56