Meiko UPster H 500 M2 Original Operating Instructions page 15

Hood type dishwashing machine
Hide thumbs Also See for UPster H 500 M2:
Table of Contents

Advertisement

4.3
Type label
4.4
GiO MODULE
4.5
Blue operating concept
9760413
The rating plate on the UPster H 500 is located on the left side or right side in the
lower rear section of the machine. Additional rating plates are located on the switch
cabinet behind the front panel, on the display and on the separate GiO MODULE (if
it is part of the machine).
The following information can be found on the rating plate:
1 Name and address of manufacturer
2 Machine type
3 Model name
4 Serial number
5 Current type
6 Electrical connection
7 Rated power boiler
8 Water pressure
9 Boiler capacity
10 Steam connection
11 Year of manufacture
12 CE mark
13 IP protection rating
The module works according to the principle of reverse osmosis. Drinking water is
pressed by a pump through a semi-permeable membrane. The membrane lets only
water molecules through. The hardness components and salts (lime scale, etc.) con-
tained in the water are held back. The clean water (permeate) is brought to the dish-
washing machine; the materials held back (concentrate) are brought to the drain.
1 AktivPlus filter
The parts of the dishwasher that must be touched by the operator in operation and
in daily use are blue. And so after a short briefing, operators know intuitively that
they have to remove and clean the wash system, tank cover sieve and filter, for ex-
ample.
15 / 56

Advertisement

Table of Contents
loading

This manual is also suitable for:

M004dwht10m2-20

Table of Contents