Mitsubishi Electric GOT 1000 User Manual page 71

1 Standards applicable to the EMC Directive
The following products have shown compliance through direct testing (to the identified standards) and
design analysis (forming a technical construction file) to the European Directive for Electromagnetic
Compatibility (2004/108/EC) when used as directed by the appropriate documentation.
Type : Programmable Controller (Open Type Equipment)
Standard
EN61131-2 : 2007
Programmable controllers
- Equipment, requirement and tests
For more details please contact the local Mitsubishi Electric sales site.
2 About models applicable to the EMC Directive
The following table lists the modules compliant with the EMC Directive.
: Compliant with EMC Directive
Item
GT1020-LBD/LWD/LBD2/LWD2/LBL/LWL/
LBDW/LWDW/LBDW2/LWDW2/LBLW/LWLW
GT1030-LBD/LWD/LBD2/LWD2/LBL/LWL/
LBDW/LWDW/LBDW2/LWDW2/LBLW/LWLW/
HBD/HWD/HBD2/HWD2/HBL/HWL/HBDW/
HWDW/HBDW2/HWDW2/HBLW/HWLW
GT1045-QSBD, GT1040-QBBD
GT1055-QSBD, GT1050-QBBD
Please use the GOT whose hardware version is later than that described.
Confirm the hardware version with the products rating plate.
(Products that the EMC Directive applies to are marked with the CE mark logo.)
Compliance with all relevant aspects of the standard.
EMI
(Radiated Emissions)
Compliance with all relevant aspects of the standard.
EMS (ESD,RF electromagnetic field, EFTB, Surge, RF conducted
disturbances and Power frequency magnetic field)
: Not compliant with EMC Directive
EMC Directive
GRAPHIC OPERATION TERMINAL
GT1020-LBD
MODEL
IN 20.4 26.4VDC POWER 1.9W MAX
S/N 6Y0001 AB
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
80M1 IND. CONT. EQ
US LISTED
5.2.1 Requirements for Conformance to EMC Directive
Remark
Hardware version
A or later
A or later
A or later
A or later
AB
Hardware version
5.2 EMC DIRECTIVE
1
2
3
4
5
6
7
8
5 - 2