Mitsubishi Electric GOT 1000 User Manual page 151

11.3.3 Screen display content
1)
1) Connection status of the communication ports
Indicates the connection status of Standard I/F-1 and I/F-2.
Listed in the table below are display items and the connection status (channel number).
Display item
PLC
BCR
TRANS.
PC
2) Communication status
Communication status of each communication port is displayed on this screen.
The SD and RD symbols appear in black on white (
received, and in white on black (
communication status.
The SD and RD symbols on the screen indicate normal communication or cable disconnection.
Port Channel number
I/F-1
IF-2
[During normal communication (with connection to a device that supports the transparent mode)]
The SD and RD symbols for both I/F-1 and I/F-2 blink.
[When the connecting cable with the controller is disconnected]
Only the SD symbol next to I/F-1 blinks.
Channel number
Ch1 "PLC" appears when connected to a controller (PLC or microcomputer)
Ch8 "BCR" appears when connected to a bar code reader
"TRANS." appears when the controller that is allocated to one of the
communication ports supports the transparent mode
Ch9
"TRANS." automatically changes to "PC" when communicating with
drawing software
"PC" appears when the controller that is allocated to one of the
Ch9
communication ports does not support the transparent mode
,
SD RD
Controller type
Ch1 MELSEC-FX

Ch8, Ch9
2)
3)
Remarks
, ) while data are being sent or
SD RD
) at other times. They may appear lit depending on the
11.3 Communication Monitor
11.3.3 Screen display content
9
10
11
12
13
14
15
16
11 - 16