Mitsubishi Electric GOT 1000 User Manual page 189

Checking method of OS, Communication driver version
15.2.2 Devices that can be monitored
For further information about the monitor device names that can be monitored and the scope, see the
following:
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
15.2.3 Precautions
(1) Monitoring and testing real number data
Real number data cannot be monitored and tested.
All word devices containing real number data are monitored in integer data (binary data).
(2) Monitoring devices in 32-bit (two-word) module
When monitoring word devices (T, C, D, W, etc.) in 32-bit (two-word) module, those with 32 bits of
data remaining are monitored.
Devices with 16 bits (one-word) of data remaining are not monitored.
If an odd number is specified for the first monitor device number, the last device number of the
specified controller will not be displayed.
(Example) When the data entry of the A2NCPU is monitored in units of 32 bits from odd numbers
(D1, D3 ...)
(3) Changing the timer/counter set values of QnACPU
The timer/counter set values of QnACPUs whose date on the CPU rating plate is after [9707B] can
be changed.
<Information on the rating plate>
(4) Programs capable of changing timer/counter set values
Only the main program can change the timer/counter set values of AnNCPUs, AnACPUs, and
AnUCPUS.
Check the version of OS or communication driver installed in GOT at [OS
information] of the utility.
Refer to the following for details.
Section 14.2 OS Information
Screen Design Manual
D1017 D1018 D1019 D1020 D1021 D1022 D1023
Unit of monitor display
PROGRAMMBLE CONTROLLER
DATE 9707 B
Date of manufacture
(Device name)
Nothing displayed
Function version
15.2 Device Monitor
15.2.2 Devices that can be monitored
9
10
11
12
13
14
15
16
15 - 2