Mitsubishi Electric GOT 1000 User Manual page 118

8.6 Stand
Stand is used to fix the GOT (For GT105 ) to standing status in order to debug the monitor screen data
easily.
8.6.1 Applicable stand
The following stand is applicable for GT105 .
Product name
Stand
8.6.2 Installing procedure
1 Adjust the mounting angle of GOT with the angle adjusting fitting of
the stand.
2 Put the GOT into the stand from the stand front side and fix it using
the fixtures.
For how to mount the GOT, refer to the following.
For details of the stand, refer to the following.
GT05-50STAND
8 - 26 8.6 Stand
8.6.1 Applicable stand
Model
GT05-50STAND
Section 6.5 Installation Procedure
GOT1000 Series Stand User's Manual
Stand for 5.7" (For GOT1000 Series)
Contents
Adjust to
45 , 55 , 65 or 75 .
Angle adjusting fitting
GOT
mounting face