Mitsubishi Electric GOT 1000 User Manual page 240

• For 1-point press
Touch [GT10-50FMB].
17 - 4 17.3 Standard Monitor OS/Communication Driver Installation Using Memory Board
17.3.1 Installation method when the GOT is turned on
4 The dialog box on the left is displayed for
confirmation.
Touch [YES] button to start the installation, and
[NO] to abord.
5 While the installation is executed, the dialog box
on the left is displayed.
6 Installation is completed.
Touch the ESC button to restart the GOT and
displays the user-created to screen.
(If the project data does not exist, a message
appears to notify that the project data does not
exist.)
If an error occurs during copy, an error message
appears.
For details of error messages, refer to the
following.
Section 14.5.4 Error display
1 Power OFF the GOT, and attach the memory
board which stores the standard OS and
communication driver to the GOT.
2 While touching the upper left corner of the GOT
screen, power ON the GOT.
3 When the [Select mode] window appears, select
the [GT10-50FMB].
For details of install, refer to the following.
Section 14.5.3 GT10-50FMB operation