Mitsubishi Electric GOT 1000 User Manual page 68

4.2.7 GT1045-QSBD/GT1040-QBBD
No.
1) PLC connection interface (RS-232)
2) PLC connection interface (RS-422)
3) USB interface
4) USB cover
5) Power terminal
6) Rating plate (nameplate)
7) Hole for unit installation fitting
8) Battery cover
9) Battery
10) Memory board cover
11) Memory board interface
12) Terminating resistor selector switch
For the connection to the controller (PLC) or PC, refer to the following.
4 - 11 4.2 Back Panel
4.2.7 GT1045-QSBD/GT1040-QBBD
1)
2)
10) 11) 3) 4)
7)
Name
For communicating with controller (PLC, microcomputer board, bar code
reader, etc) or personal computer (OS installation, project data download,
transparent) (D-sub 9-pin male)
For communicating with controller (PLC, microcomputer board, etc)
(D-sub 9-pin female)
For PC connection (OS installation, project data download, transparent)
(Mini-B)
Open or close when using the USB interface
Power terminal and FG terminal (for power supply (24VDC) to GOT and
grounding)
Hole for the inserting installation fittings (accessory) during the GOT
installation to the panel (4 holes at top and bottom)
Open or close when replacing the battery.
GT11-50BAT battery for storing clock data, alarm history, recipe data and
time action setting value
(The project data is stored in the built-in flash memory.)
Remove when using the memory board.
Interface for mounting the memory board to the GOT.
Terminating resistor selector of RS422/485
(330 /OPEN/110 ) (At factory shipment: 330 )
GOT 1000 Series Connection Manual
6)
Battery cover opened
12)
9)
8)
5)
7)
Specifications
