Mitsubishi Electric GOT 1000 User Manual page 46

Item
Weight
Compatible software package
*1:
*2:
*3:
*4:
*5:
3 - 3 3.2 Performance Specifications
GT1020-LBD/LWD
0.2kg (Excluding mounting fixtures)
GT Designer2 Version2.43V or later/GT Designer3 Version1.01B or later
• Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to
completely avoid this symptom, as the liquid crystal display comprises of a great number of display elements.
Flickers may be observed depending on the display color. Please note that these dots appear due to its
characteristic and are not caused by product defect.
• Flickers and partial discoloration may be generated on the liquid crystal display panel due to the display
contents or the contrast adjustment. However, please note that these phenomena appear due to its
characteristic and are not caused by product defect.
• There is a difference in the display brightness and the color tones between liquid crystal display panels. When
using multiple liquid crystal display panels, please note that there is an individual difference between them.
• A crosstalk (shadow as an extension of the display) may appear on the liquid crystal display panel. Please note
that it appears due to its characteristic.
• When the display section is seen from the outside of the display angle, the display color seems like it has
changed. Please note that it is due to its characteristic.
Please note that the response time, brightness and color of the liquid crystal display panel may vary depending
on the usage environmental temperature.
Especially in the low temperature environment, the display response becomes slow due to the characteristics of
the STN liquid crystal. Please check the display response in advance for using this product.
• When the same screen is displayed for a long time, an incidental color or partial discoloration is generated on
the screen due to heat damage, and it may not disappear. To prevent heat damage, the screen saver function is
effective. For details on the screen saver function, refer to the following.
Chapter 12 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
For the details of system information, refer to the following.
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual
ROM in which new data can be written without deleting the written data.
Set the terminating resistor selector switch of the GOT in accordance with the connection type when adopting
GOT multidrop connection. For details of GOT multidrop connection, refer to the following.
GOT1000 Series Connection Manual
Note that this does not guarantee all users' operation environment.
In addition, the product may not be used in environments under exposition of oil or chemicals for a long period of
time, or in environments filled with oil-mist.
Specifications
GT1020-LBD2/LWD2
Screen Design Manual
GT1020-LBL/LWL
0.18kg (Excluding mounting
fixtures)