Mitsubishi Electric GOT 1000 User Manual page 138

(2) Standard interface display BOX
Displays communication interface.
(a) GT1020, GT1030
The standard interface includes the following two types.
Standard I/F-1: For communication with PLC, microcomputer and other equipment
Standard I/F-2: For communication with PC (drawing software), modem, bar code reader and
transparent
Standard I/F-1
Whether an RS-422 or an RS-232 interface (Standard I/F-1) for communication with PLC is
used depends on the GOT model.
• GT1020-LBD/LWD/LBL/LWL/LBDW/LWDW/LBLW/LWLW,
GT1030-LBD/LWD/LBL/LWL/LBDW/LWDW/LBLW/LWLW/HBD/HWD/HBL/HWL/HBDW/
HWDW/HBLW/HWLW: RS-422 fixed
• GT1020-LBD2/LWD2/LBDW2/LWDW2, GT1030-LBD2/LWD2/LBDW2/LWDW2/HBD2/
HWD2/HBDW2/HWDW2: RS-232 fixed
The type of the interface (Standard I/F-2) for connection to PC is always RS-232.
(b) GT104
The standard interface includes the following three types.
Standard I/F-1(RS-422): For communication with PLC, microcomputer and other equipment
Standard I/F-2(RS-232): For communication with PLC, PC (drawing software), modem, other
Standard I/F-3(USB):
Standard I/F-2 (RS-232)
11 - 3 11.1 Standard I/F Setting
11.1.3 Display contents of standard I/F
Standard I/F-2
+
INPUT
24VDC
-
(FG)
RS-422
SDA
SDB
RDA
RDB
SG
RSA
RS-232
RSB
CSA
CSB
equipment, bar code reader and transparent
For communication with PC (drawing software) and transparent
Standard I/F-3 (USB)
Standard I/F-1 (RS-422)