Mitsubishi Electric GOT 1000 User Manual page 124

8.9 Connector Conversion Adapter
GT10-9PT5S type connector conversion adapter enables an easy crossover wiring for the multi-drop-
connected GOTs.
For the wiring between the connector conversion adapter and the controller, refer to the following manual.
8.9.1 Applicable connector conversion adapter
The following connector conversion adapter is applicable.
Model
GT10-9PT5S
8.9.2 Installing procedure
1 Turn the GOT power off.
2 Connect the connection conversion adapter to the RS-422/485
interface on the GOT.
3 Fix the connection conversion adapter to the GOT using the
provided M3 tapping screws.
4 Tightening torque: 0.3 to 0.6N m
8 - 32 8.9 Connector Conversion Adapter
8.9.1 Applicable connector conversion adapter
GOT1000 Series Connection Manual
(1) GOTs supporting the connector conversion adapter
The followings are the GOTs compatible with the connector conversion adapter.
GOT
GT1055-QSBD, GT1050-QBBD
GT1045-QSBD, GT1040-QBBD
(2) Checking method of hardware version
Confirm the hardware version with the products rating plate.
GRAPHIC OPERATION TERMINAL
MODEL
IN 20.4 26.4VDC
S/N
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
Hardware version
Version C or later
Version A or later
GT1030-LBD
POWER 2.2W MAX
710001 AA
Contents
For GOT multi-drop connection
Standard monitor OS
Standard monitor OS[01.12.**]
AA
Hardware version