Mitsubishi Electric GOT 1000 User Manual page 28

1. OVERVIEW
1 About GOT
A GOT is installed on the panel surface of a control panel or operating
panel and connects to the PLC within the control panel. The GOT
carries out switch operation, lamp display, data display, message
display, etc.
For the display screen, two kinds of screens are available : user screen
and utility screen.
(1) User screen
The user screen is a screen drawn by drawing software.
The objects "Touch switch", "Lamp display", "Comment display", and "Numeric display" can be
arbitrarily arranged on the display.
A "horizontal format" or "vertical format" may be selected for displaying a user's project.
Moreover, multiple screens created within drawing software can be individually selected or
overlapped for the display.
For details, refer to the following.
(2) Utility Screen
The utility screen is a factory drawn horizontal screen that cannot be edited.
The utility screen has options for "Contrast ", "Buzzer volume ", etc, and the format is horizontal
only.
For details, refer to the following.
1 - 1
GT Designer2 Version
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual
Chapter 9 to Chapter 17
Basic Operation/Data Transfer Manual
Screen Design Manual
PLC
Connector for
program
GOT