Mitsubishi Electric GOT 1000 User Manual page 238

1 Operation on the OS installation screen
17 - 2 17.2 Standard monitor OS/ Communication Driver Installation
Turn the GOT
power on with
the lower right
corner touched.
Checking the communication driver version
Some versions of the Standard monitor OS and communication driver may not be
compatible with each other, and the communication driver may not function properly.
(e.g., The version of the Standard monitor OS is too old to recognize the newer
version of the communication driver.)
The Standard monitor OS checks the version of the communication driver to see if it
is compatible. If it is not compatible, a dialog that recommends Standard monitor OS
update will appear.
Touching the button will take the screen back to the utility display screen.
OK
Normal operation of the unit will require an update of the Standard monitor OS.
1 Turn on the power while pressing and holding the
bottom right corner of the screen.
2 The OS installation screen will appear.
3 Install the Standard monitor OS and
communication driver from drawing software.
Refer to the chapter below for how to install the
Standard monitor OS and communication driver
from drawing software.
GT Designer2 Version
Basic Operation/Data Transfer Manual
GT Designer3 Version1
Screen Design Manual (Fundamentals)
4 At the completion of Standard monitor OS/
communication driver installation, the GOT
reboots itself and the user-created screen will
appear.
If no project data exist, a dialog will appear
indicating that no project data exist.