Mitsubishi Electric GOT 1000 User Manual page 241

Graphic operation terminal
Hide thumbs Also See for GOT 1000:
Table of Contents

Advertisement

18. MAINTENANCE AND INSPECTION
STARTUP AND MAINTENANCE
PRECAUTIONS
When power is on, do not touch the terminals.
Doing so can cause an electric shock or malfunction.
Connect the battery correctly.
Do not discharge, disassemble, heat, short, solder or throw the battery into the fire.
Incorrect handling may cause the battery to generate heat, burst or take fire, resulting in injuries or
fires.
Before starting cleaning or terminal screw retightening, always switch off the power externally in all
phases.
Not switching the power off in all phases can cause a unit failure or malfunction.
Undertightening can cause a short circuit or malfunction.
Overtightening can cause a short circuit or malfunction due to the damage of the screws or unit.
STARTUP AND MAINTENANCE
PRECAUTIONS
Do not disassemble or modify the unit.
Doing so can cause a failure, malfunction, injury or fire.
Do not touch the conductive and electronic parts of the unit directly.
Doing so can cause a unit malfunction or failure.
The cables connected to the unit must be run in ducts or clamped.
Not doing so can cause the unit or cable to be damaged due to the dangling, motion or accidental
pulling of the cables or can cause a malfunction due to a cable connection fault.
When unplugging the cable connected to the unit, do not hold and pull the cable portion.
Doing so can cause the unit or cable to be damaged or can cause a malfunction due to a cable
connection fault.
Do not drop or apply any impact to the battery.
If any impact has been applied, discard the battery and never use it.
The battery may be damaged by the drop or impact.
Before touching the unit, always touch grounded metal, etc. to discharge static electricity from human
body, etc.
Not doing so can cause the unit to fail or malfunction.
DISPOSAL PRECAUTIONS
When disposing of the product, handle it as industrial waste.
The GOT does not include consumable components that will cause the shorten life.
However, the battery(For GT1030, GT104
has life length.
(For the replacement of the liquid crystal screen, please consult your nearest sales office or FA center.)
For the battery, refer to the following.
Section 3.2 Performance Specifications
For the life of the LCD screen or backlight, refer to the following.
Section 3.2 Performance Specifications
WARNING
CAUTION
CAUTION
, GT105
), liquid crystal screen and backlight(For GT105
17
18
)
18 - 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gt10

Table of Contents