Mitsubishi Electric GOT 1000 User Manual page 175

7 Utility call
Operation
Touch [Utility call].
Touch bottoms to set for
the Utility call key.
(1) When using GT1020
For the key position, 1 point only can be set.
(2) When the utility call key is set to the zero point
Refer to the following for the utility screen displaying method:
(3) When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using
the drawing software.
If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for details on setting passwords.
1
2
3
3
4
Touch
• Pressing the special function switch set on the user-created screen
• Selecting [Utility] from the "Select mode" screen
Section 9.2.1 Display operation of main menu
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Touch [Utility call] to bring up the setting window.
Touch or displayed on the four corners
of the setting screen.
The button repeats
pressed.
Change the part to be set as a key position to
.
The key position can be set to the zero point.
When the key position is specified by one point,
the time to switch to the utility when the key
position is kept pressing can be set.
Touch the time area.
After changing the settings, touch the
button to save the changes and close the setting
window.
Screen Design Manual
12.2 Operation Settings
12.2.3 Setting operation of operation
9
10
11
every time it is
12
ESC
13
14
15
16
12 - 16