Mitsubishi Electric GOT 1000 User Manual page 114

8.4.2 Function specification
PC
(GT Designer2, GT Designer3)
Transfer direction
1) PC Memory
loader
2) Memory loader
PC
3) Memory loader
GOT
4) GOT Memory
loader
*1 : Ver.01.08.00 or later of the standard monitor OS of the GT10 is applicable.
8 - 22 8.4 Memory loader
8.4.2 Function specification
1) Standard monitor OS
Font data
Communication driver
Project data
2) Project data
Resource data
Data
selection
Project Resource
switch
data
--
--
PROJECT
+ OS
PROJECT
PROJECT
*1
+ OS
PROJECT
GT10-LDR Memory loader USER'S MANUAL (Chapter 7 Function specification)
3) Standard monitor OS
Font data
Communication driver
Project data
4) Standard monitor OS
Communication driver
Project data
Resource data
Memory loader
: Available to transfer
Transfer data
Font
Standard
data monitor OS
data
GT1020, GT1030
: Unavailable to transfer
Communi-
Operation
cation
*2
driver
After all data in the
memory loader is
deleted, the data
selected with GT
Designer2 or GT
Designer3 is written to
the memory loader all
at once.
The project data or
resource data is read
out from the memory
loader to a PC
All data in the memory
loader is written to the
GOT.
Only the project data
in the memory loader
is written to the GOT.
After all data in the
memory loader is
deleted, all data in the
GOT is read out to the
memory loader.
After all data in the
memory loader is
deleted, only the
project data and
resource data in the
GOT are read out to
the memory loader.