Mitsubishi Electric GOT 1000 User Manual page 127

9. UTILITY FUNCTION
The utility functions allow the user to confirm the settings for communication interface, screen display,
operation methods, and clock data as well as OS information.
GT10 is factory-installed with the Standard monitor OS and BootOS.
(An installation of the Standard monitor OS or BootOS is not required to use the utility functions.)
9.1 Utility Function List
The items in the following list can be set/operated on the utility screens.
Item
Language
Standard I/F
Data transfer
Communication monitor
Keyword
Time
Screen save
Backlight
Contrast
Brightness
Opening time
Buzzer volume
Buzzer setting
Window move
buzzer
Calibration
*1
Security
Utility call
Key reaction
Clock setting
GT1020
Switches the display language for the utility functions (Japanese/English)
Displays the detailed information about the communication method and communication driver
Displays the screen for transferring project data between the PC and GOT
(If any device other than the PC is allocated to the interface for communication with PC, the
GOT will not be able to communicate with the PC, except when the Data transfer window is
on the screen.)
Displays the communication status of each communication port
Sets a keyword of the FX series PLC.
Sets the screensaver activation time (from the last time the screen was touched)
Setting range: 0 to 60 min. (Screensaver is disabled when it is set to 0 minute.)
Default : 0 min.
This setting is used to decide whether to turn the backlight on or off when the screensaver
comes on
Default : OFF
Adjusts the contrast on the liquid crystal display (16 level adjustment, 0 to 15)
Adjusts the intensity
on the liquid crystal
-
display (8 level
adjustment, 0 to 7)
The title display period at the main unit boot can be set. (0 to 60 sec)
Default : 5 sec
Changes the buzzer settings (OFF/SHORT/LONG)
Default : SHORT
Whether turn ON/OFF buzzer when move window can be selected
Default : ON
Calibrates the touch
panel sensitivity
Security level change (security password input of each object)
Setting of the menu call key
Display of key reaction speed
Setup the method to adjust the time between GOT clock data and clock data of PLC CPU
connected with GOT
Functions overview
GT1030
GT104
-
9.1 Utility Function List
GT105
-
(Continued to next page)
9 - 1
9
10
11
12
13
14
15
16