Table of Contents
Advertisement
10.1.4 Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The platform requests picture
directly from the cloud for picture and analysis. The function is only supported by certain models.
Steps
Caution
If cloud storage is enabled, the pictures are stored in the cloud storage server preferentially.
1. Go to Configuration → Storage → Storage Management → Cloud Storage.
2. Check Enable Cloud Storage.
3. Set basic parameters.
Protocol Version
Server IP
Serve Port
User Name and
Password
Picture Storage Pool
ID
4. Click Test to test the configured settings.
5. Click Save.
10.2 Video Recording
This part introduces the operations of manual and scheduled recording, playback, and
downloading recorded files.
10.2.1 Record Automatically
This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and
Alarm for details.
Thermal Network Camera User Manual
The protocol version of the cloud storage server.
The IP address of the cloud storage server. It supports IPv4 address.
The port of the cloud storage server. 6001 is the default port and you
are not recommended to edit it.
The user name and password of the cloud storage server.
The ID of the picture storage region in the cloud storage server. Make
sure storage pool ID and the storage region ID are the same.
49
Advertisement
Table of Contents
