Set Image Encoding Parameters; View Picture - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual
Adjust overlay
sequence
6. Click Save.

3.2.6 Set Image Encoding Parameters

If the captured pictures are not clear, set the resolution of the captured pictures and the picture
size.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → Image Encoding .
2. Select a channel.
3. Select Capture Resolution.
4. Enter the picture size.
JPEG Picture Size
The size of the captured picture.
5. Click Save.

3.3 View Picture

The device supports viewing pictures saved on the memory card.
Before You Start
The memory card has been installed and the pictures have been captured.
Steps
1. Click Picture.
2. Set searching conditions.
Note
The searching conditions vary with different models. The actual interface prevails.
3. Click Search.
The qualified picture information will be displayed in list.
4. Optional: You can also do the following operations.
Click / to adjust the display sequence of the overlay
information.
Figure 3-7 Set Image Encoding Parameters
13