Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Night
The image is black/white or colorful and the supplement light will be enabled to ensure clear
live view image at night.
Auto
The camera switches between the day mode and the night mode according to the illumination
automatically.
Scheduled-Switch
Set the Start Time and the End Time to define the duration for day mode.
Note
Day/Night Switch function varies according to models.
●
You can turn on the smart supplement light in auto, night, and schedule-switch modes for better
●
image effect.
11.5.6 Set Supplement Light
Steps
1. Go to Configuration → Maintenance → System Service .
2. Check Enable Supplement Light.
3. Click Save.
Set Laser Parameters
You can enable the laser supplement and adjust the laser supplement angle to improve the image
effect.
Before You Start
Check Enable Supplement Light first before you configure this function.
Steps
1. Go to Configuration → System → Maintenance → System Service .
2. Select Laser Optical Axis Adjustment from the drop-down list.
3. Check Enable Laser Optical Axis Adjustment.
4. Adjust the optical zoom ratio to the maximum value via PTZ control panel.
5. Click the direction buttons to adjust the position of laser.
6. Adjust the sensitivity. The higher the value is , the faster the cursor moves.
7. Click Save when the laser point is in the center of live view.
8. Go to Configuration → Image → Display Settings → Image Enhancement to set the laser
compensation region.
9. Adjust the level of laser compensation.
71
Advertisement
Table of Contents
