Transition Control Block And Flexi Pad Control Block (Simple Type) - Sony MVS-8000 User Manual

a Bank selection buttons
Press any of the [BANK1] to [BANK4]
buttons to select a bank of 24 memory recall
buttons. The selected button lights amber.
b Memory recall buttons
You can use these buttons to recall
frequently used menus, utility functions,
shotbox registers, or macro registers that
you have assigned.
When a utility function is allocated to a
button, the button lights orange (or green
depending on the status), and the allocated
function name appears. Pressing the button
executes the allocated function. When the
function constitutes a switching on/off
operation, the button lights green;
otherwise, it only momentarily lights green.
When a shotbox register or macro register
recall is assigned to a button, the button
Transition Control Block and Flexi Pad Control Block
(Simple Type)
The simple versions of the transition
control block and Flexi Pad control block
shown in the following figure is designed to
allow simplified operations than with the
standard type. The transitions carried out
using these simple-type control blocks are
also referred to as "simple transitions" in
this User's guide.
lights orange, and the assigned register
name appears. (If the register is empty, the
button goes off.) In the case of a shotbox
function, pressing the button executes the
assigned shotbox function, and the button
lights yellow. In the case of a macro
register, pressing the button executes the
assigned macro, and the button flashes
yellow.
You can also assign enabling and disabling
of macro attachment to use as the MCRO
ATTCH ENBL button. You can make a
setup setting such that when MCRO
ATTCH ENBL is On, the buttons for which
a macro attachment is set light.
For details, see "Assigning a Function to a
Memory Recall Button in the Utility/
Shotbox Control Block" in Chapter 19
(Volume 3).
Names and Functions of Parts of the Control Panel
97