Sony MVS-8000 User Manual page 135

• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, then click the left mouse
button to open the numeric keypad
window by which you can input the
desired value.
To scroll a list
Position the cursor over the list you want to
scroll, and turn the mouse wheel.
In the setup menus you can select the
direction of mouse wheel rotation that
increases the setting value. And you can
also switch the functions of the right and
left mouse buttons.
For details, see Chapter 19 "Control Panel
Setup (Panel)" (Volume 3).
Numeric keypad window
1 Item display
2 Max./min. value indication
a Item display
This is the name of the parameter being set
in the numeric keypad window.
3 Input value
4 Close button
5 TC (timecode)
button
6 – (minus)
button
7 Clear button
8 Trim button
9 Enter button
b Max./min. (maximum/minimum)
value indication
This shows the maximum and minimum
settings of the parameter.
c Input value
This is the value being input into the
numeric keypad window.
d Close button
This closes the numeric keypad window.
e TC (timecode) button
When the numeric keypad window is
opened for a setting requiring a timecode
value to be entered, this button appears in a
depressed state.
You can enter a timecode value in the range
that depends on the signal format (see
"Setting the Signal Format (Format
Menu)" in Chapter 18 (Volume 3)) as
follows:
00:00:00:00 to 23:59:59:nn,
where nn = (number of frames per
second) – 1.
f – (minus) button
This toggles the sign of the entered value.
When it is pressed, the value is negative.
g Clear button
This clears the input. It does not change the
parameter setting.
h Trim button
After entering the difference from the
current value, press this button to confirm
the numeric input.
i Enter button
This confirms the entered value.
If correctly set, the numeric keypad
window closes.
If not correctly set, the input display
changes color.
Basic Menu Operations
135