Sony MVS-8000 User Manual page 290

3
4
290
Basic Procedure for Wipe Settings
Press the button to select the desired pattern.
The selected pattern is displayed on the screen.
The parameters change according to the selected pattern, and you can
adjust the pattern.
• When a polygon wipe is selected (pattern number 49)
Knob Parameter Adjustment
1 No Number of points
2 Star Rate Angularity of star
a) A value of –100.00 completely removes the star "rays," leaving a circle; at +100.00 the
"rays" are at their sharpest.
• When a mosaic wipe is selected (pattern numbers 200 to 203, 206 to
213, 224 to 247, 250 to 257, 260 to 269)
Knob Parameter Adjustment
1 H Tile No Number of tiles horizontally
2 V Tile No Number of tiles vertically
• When a karaoke wipe is selected (pattern numbers 220 to 223)
Knob Parameter Adjustment
1 Start Position of start tile
2 Row No Number of rows of tiles
3 Phase Delay for next row
a) At –100.00 tiles appear from the top (or left edge) of the screen; at +100.00 from the
bottom (or right edge) of the screen.
b) At –100.00 all rows appear simultaneously; at +100.00 until one row of tiles is completely
displayed, the next row does not start to appear.
• When a random wipe is selected (pattern number 273)
Knob Parameter Adjustment
1 H Size Tile width
2 V Size Tile height
3 Volatility Rate of tile generation
• When a diamond dust wipe is selected (pattern number 274)
Knob Parameter Adjustment
1 H Size Particle width
2 V Size Particle height
3 Flash Rate Rate of generation of particles
Setting values
3 to 64
a)
–100.00 to +100.00
Setting values
2 to 36
2 to 18
Setting values
a)
–100.00 to +100.00
1 to 36
b)
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00