Setting The Independent Key Transition Type By A Menu Operation - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

Independent key transition operations when using the CCP-6224/

6324 Control Panel

To carry out an independent key transition, press the corresponding button in

the independent key transition execution section of the transition control block.

The color of the button shows the status as follows.

Lit green: transition in progress.

Lit amber: key inserted.

Lit red: key inserted into final program output.

Off: no key inserted.

For details of setting the transition rate, see "Setting the transition rate in the

Flexi Pad control block" (page 174).

Setting the Independent Key Transition Type by a Menu

You can also select the required independent key transition type by a menu

In the M/E or PGM/PST menu, select first the desired one from VF1

'Key1' to VF4 'Key4,' then HF6 'Transition.'

The Transition menu for the selected appears.

Select the required transition type in the <Transition Type> group.

Independent key transition execution section

Transition control block (compact type)

Independent Key Transitions