Specifying The Key Output Destination - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

Assigning a DME output signal as a monitor signal

In the Processed Key menu, press [Monitor].

The Monitor menu appears.

Press [Monitor Set], turning it on.

In the <DME Select> group, select the DME channel (DME1 to DME8) to

This assigns the selected DME output to DME MON V and DME MON K.

The colors with which [DME1] to [DME8] are lit show the key assignment

Lit green: DME currently being monitored

Lit amber: DME that can be monitored

Off: Unassigned DME

Specifying the Key Output Destination

Using the key processed keyer signals (external processed key)

To select the key processed keyer key fill and key source signals on the AUX

bus or edit preview bus, press [Ext Proc Key] turning it on, in the Processed

This assigns the key fill and key source signals for M/E-1 key 1 to reentry

signals PROC V and PROC K.

When a DME is selected on the keyer, the key fill and key source signals to

which a DME effect is applied are assigned.

You cannot select the PROC V and PROC K signals using the cross-point

selection buttons of the M/E or PGM/PST bank.

Using the key processed keyer signals or signals to which a DME

effect is applied in frame memory (frame memory feed)

To use the key processed keyer key fill and key source signals on the frame

memory source buses, in the Processed Key menu, press [FM Feed]. [Ext Proc

Key] turns on, and the key fill and key source signals processed on the

currently selected keyer are automatically assigned to frame memory source

buses 1 and 2. When a DME is selected on the keyer, the key fill and key source

signals to which a DME effect is applied are assigned.

Key Setting Operations Using Menus