Siemens SIMATIC ET 200AL System Manual page 540

Technical specifications
Interrupts/diagnostics/status information
Substitute values can be applied
Interrupts
Diagnostic interrupt
Diagnostics alarms
Wire break
Short-circuit
Diagnostics indicator LED
Channel status display
For module diagnostics
Electrical isolation
Between load voltages
Electrical isolation of channels
Between channels
Between the channels and backplane bus
Between the channels and power supply of the
electronics
Insulation
Insulation tested with
Degree of protection and protection class
Degree of protection according to EN 60529
•
•
Ambient conditions
Ambient temperature in operation
Min.
Max.
Connection technology
Inputs/outputs
Power supply
ET-Connection
ET-Connection
Dimensions
Width
Height
Depth
Weights
Weight, approx.
26
IP65
IP67
6ES7145-5ND00-0BA0
Yes; channel-based, configurable
Yes; configurable
Yes; channel-based, only for output type current
Yes; actuator supply module-based, for output
type voltage channel-based
Yes; green LED
Yes; green/red LED
Yes
No
Yes
No
707 V DC (type test)
Yes
Yes
-25 °C
55 °C
M12, 5-pin
M8, 4-pin
M8, 4-pin, shielded
30 mm
159 mm
40 mm
175 g
Analog output module AQ 4xU/I 4xM12 (6ES7145-5ND00-0BA0)
Manual, 12/2016, A5E38687953-AA