Siemens SIMATIC ET 200AL System Manual page 153

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● Connects the ET 200AL distributed I/O system with PROFIBUS DP
● 24 V DC supply voltage
● Operation as DP1 slave possible
● Direct data exchange (data exchange broadcast)
● Support for 2 ET-Connection lines
● Dimensions: 45 x 159 mm
The functions supported by the module are found in the chapter Functions (Page 12).
Maximum configuration
The module has the following maximum configuration:
● 244 bytes input data
● 244 bytes output data
● 32 I/O modules, up to 16 I/O modules can be connected for each ET-Connection line
Accessories
The following component is included with the module in the packaging:
● Identification labels
Other components
The following component can be ordered as spare part:
● Identification labels
The following components can be ordered as accessories:
● Connectors
● Cables
● Stripping Tool for PROFIBUS
● Stripping Tool for ET-Connection
● M8 sealing cap
● M12 sealing cap
See also
You will find additional information on accessories and the other components in the
Accessories/Spare parts section of the ET 200AL Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/89254965) system manual.
10
Interface module IM 157-1 DP (6ES7157-1AA00-0AB0)
Manual, 12/2016, A5E32100641-AD