Siemens SIMATIC ET 200AL System Manual page 885

Error code Name
(hex)
804D0000 BadBrowseDirectionInvalid
804E0000 BadNodeNotInView
804F0000 BadServerUriInvalid
80500000 BadServerNameMissing
80510000 BadDiscoveryUrlMissing
80520000 BadSempahoreFileMissing
80530000 BadRequestTypeInvalid
80540000 BadSecurityModeRejected
80550000 BadSecurityPolicyRejected
80560000 BadTooManySessions
80570000 BadUserSignatureInvalid
80580000 BadApplicationSignature
Invalid
80590000 BadNoValidCertificates
805A0000 BadRequestCancelled
ByRequest
805B0000 BadParentNodeIdInvalid
805C0000 BadReferenceNotAllowed
805D0000 BadNodeIdRejected
805E0000 BadNodeIdExists
805F0000 BadNodeClassInvalid
80600000 BadBrowseNameInvalid
80610000 BadBrowseNameDuplicated
80620000 BadNodeAttributesInvalid
80630000 BadTypeDefinitionInvalid
80640000 BadSourceNodeIdInvalid
80650000 BadTargetNodeIdInvalid
80660000 BadDuplicateReference
NotAllowed
80670000 BadInvalidSelfReference
80680000 BadReferenceLocalOnly
80690000 BadNoDeleteRights
806A0000 BadServerIndexInvalid
806B0000 BadViewIdUnknown
806D0000 BadTooManyMatches
806E0000 BadQueryTooComplex
806F0000 BadNoMatch
80700000 BadMaxAgeInvalid
Communication
Function Manual, 12/2017, A5E03735815-AF
Status "Bad" (8000_0000 - FFFF_FFFF)
Meaning
The browse direction is not valid.
The node is not part of the view.
The ServerUri is not a valid URI.
No ServerName was specified
No DiscoveryUrl was specified.
The semaphore file specified by the client is not valid.
The security token request type is not valid.
The security mode does not meet the requirements set by the Server.
The security policy does not meet the requirements set by the Server.
The server has reached its maximum number of sessions.
The user token signature is missing or invalid.
The signature generated with the client certificate is missing or invalid.
The client did not provide at least one software certificate that is valid and
meets the profile requirements for the server.
The request was cancelled by the client with the Cancel service.
The parent node id does not to refer to a valid node.
The reference could not be created because it violates constraints imposed
by the data model.
The requested node id was reject because it was either invalid or server
does not allow node ids to be specified by the client.
The requested node id is already used by another node.
The node class is not valid.
The browse name is invalid.
The browse name is not unique among nodes that share the same relation-
ship with the parent.
The node attributes are not valid for the node class.
The type definition node id does not reference an appropriate type node.
The source node id does not reference a valid node.
The target node id does not reference a valid node.
The reference type between the nodes is already defined.
The server does not allow this type of selfreference on this node.
The reference type is not valid for a reference to a remote server.
The server will not allow the node to be deleted.
The server index is not valid.
The view id does not refer to a valid view node.
The requested operation has too many matches to return.
The requested operation requires too many resources in the server.
The requested operation has no match to return.
The max age parameter is invalid.
OPC UA communication
9.3 Using the S7-1500 as an OPC UA server
199