Siemens SIMATIC ET 200AL System Manual page 319

4.3 Address space
The figure below shows the assignment of the address space for the digital input/digital
output module DIQ 4+DQ 4x24VDC/0.5A 8xM8 with value status (Quality Information, QI).
The address space for the value status is allocated by the module, if the value status is
configured using the PROFINET interface module.
Image 4-1
Note
Parameter assignment of the channels
Parameters for the first four channels can be freely assigned.
For the channels 0 ... 3 that are configured as input, the corresponding values in the output
data do not trigger any reaction.
For the channels 0 ... 3 that are configured as output, the input value in the process image
is 0.
Configuration options of the digital input/digital output module DIQ 4+DQ 4x24VDC/0.5A 8xM8
You have the following configuration options:
● Configuration 1: without value status
● Configuration 2: with value status
Digital input/digital output module DIQ 4+DQ 4x24VDC/0.5A 8xM8 (6ES7143-5BF00-0BA0)
Manual, 02/2016, A5E3234988-AC
Address space DIQ 4+DQ 4x24VDC/0.5A 8x8M
Parameters/address space
4.3 Address space
17