Siemens SIMATIC ET 200AL System Manual page 140

Properties
The module has the following technical properties:
● BusAdapter for the direct connection of ET-Connection
● Connects the interface module via ET-Connection with the ET 200AL I/O modules
● Supports all ET 200AL I/O modules
The module supports the following functions:
● Identification data I&M 0 to 3. See system manual ET 200SP Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/58649293).
Maximum configuration
● 16 ET 200AL I/O modules
● 15 m bus cable between BusAdapter BA Send and the first ET 200AL I/O module and
between two ET 200AL I/O modules.
● Supported functions:
Accessories
The following components must be ordered separately:
● Labeling strips
● Reference identification label
● Stripping tool for ET-Connection
● Bus cables for ET-Connection
See also
You can find more information on accessories and additional components in the
Accessories/spare parts section of the ET 200AL distributed I/O system
(http://support.automation.siemens.com/WW/view/en/89254965) system manual.
Product Information Mixed Configuration ET 200SP / ET 200AL
Product Information, 02/2016, A5E33344611-AC
Function
Isochronous mode
Configuration control
Shared device
PROFIenergy
System redundancy S2
Mixed configuration
ET 200SP
IM CPU
⑥
--
⑥ ⑥
⑥ ⑥
⑥
--
-- --
BusAdapter BA-Send 1xFC
6.1 Properties
ET 200AL I/O modules on
ET-Connection
--
⑥
⑥
⑥
--
21