Siemens SIMATIC ET 200AL System Manual page 95

10.6 Safety-related symbols for IP65/IP67 modules
The following table contains an explanation of the symbols located on your IP65/67 modules,
their packaging or in the accompanying documentation.
Distributed I/O system
System Manual, 02/2018, A5E31861578-AF
Symbol Meaning
General warning sign Caution/Notice
You must read the product documentation. The product documentation contains
information about the type of potential hazard and enables you to recognize risks
and implement countermeasures.
The assigned safety symbols apply to devices with Ex approval.
You must read the product documentation. The product documentation contains
information about the type of potential hazard and enables you to recognize risks
and implement countermeasures.
Read the information provided by the product documentation.
ISO 7010 M002
Ensure the device is only installed by an electrically skilled person.
IEC 60417 No. 6182
Note that connected mains lines must be designed according to the expected
minimum and maximum ambient temperature.
Note that the device must be constructed and connected in accordance with EMC
regulations.
Note that a 230 V device can be exposed to electrical voltages which can be dan-
gerous.
ANSI Z535.2
Note that a device of Protection Class III may only be supplied with a protective
low voltage according to the standard SELV/PELV.
IEC 60417-1-5180 "Class III equipment"
Be aware that the device is only approved for the industrial field and only for in-
door use.
10.6 Safety-related symbols for IP65/IP67 modules
Technical specifications
93