Siemens SIMATIC ET 200AL System Manual page 506

Technical specifications
Measured value smoothing
Configurable
Setting: None
Setting: Weak
Setting: Medium
Setting: Strong
Encoders
Connection of signal encoders
for voltage measurement
for current measurement as 2-wire transducer
for current measurement as 4-wire transducer
for resistance measurement with two-wire connec-
tion
for resistance measurement with three-wire con-
nection
Errors/accuracies
Linearity error (in relation to input range), (+/-)
Temperature error (in relation to input range), (+/-) 0.01%/K
Crosstalk between the inputs, max.
Repeat accuracy in settled state at 25 °C (in rela-
tion to input range), (+/-)
Operational limit in the entire temperature range
Voltage in relation to input range, (+/-)
Current in relation to input range, (+/-)
Resistance in relation to input range, (+/-)
Resistance thermometer in relation to input range,
(+/-)
Basic error limit (operational limit at 25 °C)
Voltage in relation to input range, (+/-)
Current in relation to input range, (+/-)
Resistance in relation to input range, (+/-)
Resistance thermometer in relation to input range,
(+/-)
Disturbance voltage suppression for f = n x (f1 +/-
0.5%), f1 = interference frequency
Series-mode interference (peak of the interference
< rated value of the input range), min.
Interrupts/diagnostics/status information
Interrupts
Diagnostic interrupt
Limit interrupt
Diagnostics alarms
Wire break
Short-circuit
Overflow/underflow
36
6ES7144-5KD00-0BA0
Yes
Yes; 1 x cycle time
Yes; 4 x cycle time
Yes; 16 x cycle time
Yes; 32 x cycle time
Yes
Yes
Yes
Yes
Yes
0.025%
-70 dB
0.01%
0.35%
0.45%
0.25%
0.25%
0.25%
0.25%
0.15%
0.15%
40 dB
Yes; configurable
Yes; configurable
Yes; for 4 mA to 20 mA and 1 V to 5 V
Yes; encoder supply to ground, channel-based
Yes
Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)
Manual, 03/2016, A5E32350124-AC