Siemens SIMATIC ET 200AL System Manual page 372

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 16 digital inputs or digital outputs, depending on configuration and parameter assignment
– 8 DIQ signals connected to 1L+ (non-switched)
– 8 DQ signals connected to 2L+ (switched)
● M12 sockets for connection of sensors and actuators
● Digital inputs:
– 24 V DC supply voltage
– Suitable for switches and proximity switches
– Input delay configurable
– Configurable diagnostics can be set for each module
● Digital outputs:
– Rated load voltage 24 V DC
– Suitable for solenoid valves, DC contactors, and indicator lights
– Output current per output 0.5 A
– Configurable diagnostics can be set for each module
● Counters:
– Configuration method 2xCount or 4xCount with 2 or 4 counters
– Counting frequency 2 kHz
– Counting width 32 bits
– Counting direction parameterizable or controllable via direction input
– GATE function controllable via the control interface or via control input
– Configurable diagnostics and hardware interrupts can be set for each module
– Input delay configurable
● Dimensions 45 x 159 mm
The module supports the following functions:
● Firmware update
● Identification and maintenance data I&M0 to I&M3
● Value status (Quality Information)
● PROFIenergy
Accessories
The following components are included in the module package:
● Identification labels
12
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
Manual, 09/2017, A5E38688112-AB