show bridge multicast filtering
The show bridge multicast filtering User EXEC mode command displays the multicast filtering configuration.
Syntax
show bridge multicast filtering vlan-id
Parameters
•
vlan-id — VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the multicast configuration for VLAN 1 is displayed.
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port
Forward-Unregistered
Static
----
---------
1
Forbidden
2
Forward
3
-
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Status
---------
Filter
Forward(s)
Forward(d)
Page 44
Forward-All
Static
---------
Forbidden
Forward
-
Status
----------
Filter
Forward(s)
Forward(d)