Show Ports Storm-Control - TP-Link TL-SG3109 Cli Reference Manual

show ports storm-control

The show ports storm-control Privileged EXEC mode command displays the storm control configuration.
Syntax
show ports storm-control [interface]
Parameters
•
interface — A valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
Console# show ports storm-control
Port State
---- --------
1 Enabled
2 Enabled
3 Enabled
4 Enabled
5 Enabled
6 Enabled
7 Enabled
8 Enabled
9 Enabled
10 Disabled
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Rate [Kbits/Sec] Included
---------------- --------------------------------------
100
100
100
100
100
100
100
100
1000
1000
Page 96
Broadcast
Broadcast
Broadcast
Broadcast
Broadcast
Broadcast
Broadcast
Broadcast
Broadcast
Broadcast