Show Gvrp Configuration - TP-Link TL-SG3109 Cli Reference Manual

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide

show gvrp configuration

The show gvrp configuration User EXEC mode command displays GVRP configuration information, including
timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port. (Full syntax: port)
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays GVRP configuration information:
Console> show gvrp configuration
GVRP Feature is currently enabled on the device.
Port(s) Status
------ -------
1 Enabled
4 Enabled
Registration Dynamic VLAN
Creation
------------ -----------
Normal Enabled
Normal Enabled
Timers (milliseconds)
Join
----
200
200
Page 103
Leave Leave All
----- ---------
600 10000
600 10000