ip host
The ip host Global Configuration mode command defines static host name-to-address mapping in the host cache.
To remove the name-to-address mapping, use the no form of this command.
Syntax
ip host name address
no ip host name
Parameters
•
name — Name of the host (Range: 1-158 characters)
•
address — Associated IP address.
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 124