Show Sntp Status - TP-Link TL-SG3109 Cli Reference Manual

show sntp status

The show sntp status Privileged EXEC mode command shows the status of the Simple Network Time Protocol
(SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8, unicast
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Status
----------- -------
176.1.1.8 Up
176.1.8.179 Unknown
Anycast server:
Server Interface
--------- -------
176.1.11.8 VLAN 118
Broadcast:
Interface IP address
--------- ---------
176.9.1.1 VLAN 119
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Last response
----------------------------
19:58:22.289 PDT Feb 19 2002
12:17.17.987 PDT Feb 19 2002
Status Last response
----- -----------------------------
Up 9:53:21.789 PDT Feb 19 2002
Last response
----------------------------
19:17:59.792 PDT Feb 19 2002
Page 64
Offset Delay
[mSec]
[mSec]
------ ------
7.33 117.79
8.98 189.19
Offset Delay
[mSec] [mSec]
------ -----
7.19 119.89