Show Interfaces Switchport - TP-Link TL-SG3109 Cli Reference Manual

show interfaces switchport

The show interfaces switchport Privileged EXEC mode command displays the switchport configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel port-channel-number}
Parameters
•
interface — A valid Ethernet port number.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the switchport configuration for Ethernet port 1.
Console# show interface switchport ethernet e1
Port e1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled, Uplink is 8.
Port e1 is member in:
Vlan Name
---- -------
1 default
8 VLAN008
11 VLAN011
19 IPv6 VLAN
72 VLAN0072
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Egress rule
-----------
untagged
tagged
tagged
untagged
untagged
Page 304
Type
-------
System
Dynamic
Static
Static
Static