Show Bridge Multicast Address-Table - TP-Link TL-SG3109 Cli Reference Manual

show bridge multicast address-table

The show bridge multicast address-table User EXEC mode command displays multicast MAC address or IP
address table information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address mac-multicast-address | ip-multicast-address]
[format ip | format mac]
Parameters
•
vlan-id — A valid VLAN ID value.
•
mac-multicast-address — A valid MAC multicast address.
•
ip-multicast-address — A valid IP multicast address.
•
format ip|mac — Multicast address format. Can be ip or mac. If the format is unspecified, the default is mac.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
A MAC address can be displayed in IP format only if it is in the range of 0100.5e00.0000-0100.5e7f.ffff.
Example
In this example, multicast MAC address and IP address table information is displayed.
Console# show bridge multicast address-table
Vlan MAC Address
---- --------------
1 01:00:5e:02:02:03
18 01:00:5e:02:02:08
19 00:00:5e:02:02:08
Forbidden ports for multicast addresses:
Vlan MAC Address
---- --------------
1 01:00:5e:02:02:03
19 01:00:5e:02:02:08
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 42
Type
-------
static
static
dynamic
Ports
-----
8
8
Ports
----------
1, 2
1-3
5-7