Show Qos Interface - TP-Link TL-SG3109 Cli Reference Manual

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide

show qos interface

The show qos interface User EXEC mode command displays interface QoS information.
Syntax
show qos interface [ethernet interface-number | vlan vlan-id | port-channel number] [ queueing | rate-limit]
Parameters
•
interface-number — Valid Ethernet port number.
•
vlan-id— Valid VLAN ID.
•
number — Valid port-channel number.
•
queuing — Indicates the queue strategy (WRR or EF), the weight for WRR queues, the CoS to queue map
and the EF priority.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted, etc.) is displayed.
If no interface is specified, QoS information about all interfaces is displayed.
Examples
The following example displays QoS information about Ethernet port 7.
Console> show qos interface queuing ethernet e7
e7
Ethernet
wrr bandwidth weights and EF priority:
qid weights
1 25
2 25
3 25
4 25
Cos-queue map:
cos qid
0 2
1 1
2 1
Ef Priority
dis N/A
dis N/A
dis N/A
dis N/A
Page 163