Terminal Data-Dump - TP-Link TL-SG3109 Cli Reference Manual

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide

terminal data-dump

The terminal data-dump User EXEC mode command enables dumping all the output of a show command with-
out prompting. To disable dumping, use the no form of this command.
Syntax
terminal data-dump
no terminal data-dump
Default Configuration
Dumping is disabled.
Command Mode
User EXEC mode
User Guidelines
By default, a More prompt is displayed when the output contains more lines than can be displayed on the screen.
Pressing the Enter key displays the next line; pressing the Spacebar displays the next screen of output. The data-
dump command enables dumping all output immediately after entering the show command.
This command is relevant only for the current session.
Example
This example dumps all output immediately after entering a show command.
Console> terminal data-dump
Page 283