Qos Map Dscp-Queue - TP-Link TL-SG3109 Cli Reference Manual

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide

qos map dscp-queue

The qos map dscp-queue Global Configuration mode command modifies the DSCP to CoS map. To return to the
default map, use the no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue [dscp-list]
Parameters
•
dscp-list — Specifies up to 8 DSCP values separated by a space. (Range: 0 - 63)
•
queue-id — Specifies the queue number to which the DSCP values are mapped.
Default Configuration
The following table describes the default map.
DSCP value
Queue-ID
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
Console(config)# qos map dscp-queue 33 40 41 to 1
0-15 16-39
1 2
Page 167
40-63
3