Section 2. Aaa Commands; Aaa Authentication Login - TP-Link TL-SG3109 Cli Reference Manual

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide

Section 2. AAA Commands

aaa authentication login

The aaa authentication login Global Configuration mode command defines login authentication. To return to the
default configuration, use the no form of this command.
Syntax
aaa authentication login {default | list-name} method1 [method2...]
no aaa authentication login {default | list-name}
Parameters
•
default — Uses the listed authentication methods that follow this argument as the default list of methods
when a user logs in.
•
list-name — Character string used to name the list of authentication methods activated when a user logs in.
(Range: 1-12 characters).
•
method1 [method2...] — Specify at least one from the following table:
K ey wo r d
enable
line
local
none
radius
Default Configuration
The local user database is checked. This has the same effect as the command aaa authentication login list-
name local.
Note
On the console, login succeeds without any authentication check if the authentication method is not
defined.
Command Mode
Global Configuration mode
De scri p ti o n
Uses the enable password for authentication.
Uses the line password for authentication.
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Page 17