Show Interfaces Status - TP-Link TL-SG3109 Cli Reference Manual

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide

show interfaces status

The show interfaces status Privileged EXEC mode command displays the status of all configured interfaces.
Syntax
show interfaces status [ethernet interface| port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port. (Full syntax: port)
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the status of all configured interfaces:
Console# show interfaces status
Port Type
---- -----------
1 100M-Copper
2 100M-Copper
3 100M-Copper
4 100M-Copper
5 100M-Copper
6 100M-Copper
7 100M-Copper
8 100M-Copper
9 1G-Copper
10 1G-Fiber
Port Type
---- -----------
Duplex Speed Neg
------ ----- -------
-- -- --
-- -- --
-- -- --
-- -- --
Full 100 Enabled
-- -- --
-- -- --
-- -- --
-- -- --
-- -- --
Duplex Speed Neg
------ ----- -------
Page 87
Flow Link Back
Ctrl State Pressure
---- ----- --------
-- Down --
-- Down --
-- Down --
-- Down --
Off Up Disabled
-- Down --
-- Down --
-- Down --
-- Down --
-- Down --
Flow Link
Ctrl State
---- -----
Mdix
Mode
----
--
--
--
--
Auto
--
--
--
--
--