Show Interfaces Configuration - TP-Link TL-SG3109 Cli Reference Manual

show interfaces configuration

The show interfaces configuration Privileged EXEC mode command displays the configuration for all config-
ured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number ]
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of all configured interfaces:
Console# show interfaces configuration
Port Type
---- -----------
1 100M-Copper
2 100M-Copper
3 100M-Copper
4 100M-Copper
5 100M-Copper
6 100M-Copper
7 100M-Copper
8 100M-Copper
9 1G-Copper
10 100M-Fiber
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Duplex Speed Neg
------ ----- -------
Full 100 Enabled
Full 100 Enabled
Full 100 Enabled
Full 100 Enabled
Full 100 Enabled
Full 100 Enabled
Full 100 Enabled
Full 100 Enabled
Full 1000 Enabled
Full 100 Enabled
Page 86
Flow Link Back
Ctrl State Pressure
---- ----- --------
Off Up Disabled
Off Up Disabled
Off Up Disabled
Off Up Disabled
Off Up Disabled
Off Up Disabled
Off Up Disabled
Off Up Disabled
Off Up Disabled
Off Up Disabled
Mdix
Mode
----
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto